Product parameters: 28 * 26 * 30cm

Product Material: ABS&PP

Product voltage: 220V~50HZ

Product power: 100W

Product capacity: 20L

No load operation

This product is mainly made of environmentally friendly plastic parts. At the beginning of use, there may be a slight plastic smell, which is a normal phenomenon. It is recommended to run it empty once after unpacking, and then open the door cover and let it sit for 2 hours to effectively reduce the plastic smell. As the usage time increases, the plastic smell will gradually decrease until it is eliminated

Operating instructions

After removing the water stains from the tableware, dry and disinfect it. The machine is equipped with an automatic anti UV radiation device for opening the door. In the working state, the UV lamp stops working when the cabinet door is opened until the cabinet door is closed before continuing to work

Plug in the power cord, the display screen and button light will light up for 1 second, and the power button light will flash to indicate that it has entered the shutdown state

Power button: In the shutdown state, press the “on/off” button to enter standby mode. Always on; Press the “on/off” button again to return to the shutdown state with the power light on

Drying: Press the “Drying” button in standby mode, and the display screen will flash to show “40”. After 3 seconds, enter the drying function; The drying indicator light is on; After 40 minutes of heating and fan operation. Turn off the heating and continue to operate the fan for 90 seconds. After the fan finishes working, it returns to standby mode.

Display screen: 40 indicates 40 minutes, countdown displays drying: In standby mode, press the “UV drying” button, the display screen flashes “50” for 3 seconds, and then enter the drying+UV sterilization function. Heating, sterilization, and fan operation for 50 minutes. Turn off the heating, but the fan continues to operate for 90 seconds without any display on the screen. After the fan finishes working, it returns to standby mode.

Storage: In standby mode, press the “Storage” button to store for 24 hours. The storage button light will turn on and start counting down. Dry and disinfect every 3 hours (the sterilization indicator light does not need to be lit). Repeat this process until the storage time is over. (Touch this button while other functions are being executed, and only enter the storage function after the executed function is completed.)